[one_half padding="0 20px 0 20px"] Aerial Lift Safety Aerial lifts are vehicle-mounted devices that allow workers to perform work above
Falls are the leading cause of injuries at work sites. Falls can occur from ladders, scaffolding, vehicles, heavy equipment, aerial lifts, openings, platforms, and roofs.
Here is an Example
A supervisor and three employees were placing air handler units on a third-floor mezzanine during a building remodel. The supervisor was using a wheeled pry bar to lift the air handler up so the workers could place a two-inch galvanized pipe under the air handler to serve as a roller. The supervisor was in an area about a foot from the unguarded edge and applying pressure to the pry bar slipped. The supervisor lost his balance and fell 23 feet to the cement below, causing his death.
- How could the fatality have been prevented?
- What safety precautions should the individual have taken? What precautions should the company have taken?
- Guardrails are required on work surfaces when workers are exposed to falls over 6 feet.
- Guardrails must be 42 inches high. A mid-rail is required.
- The fall protection training program must cover the recognition of potential fall hazards at the workplace for the employee.
- Body harnesses with lanyards and secure attachment points are used when guardrails cannot be provided.
Midsouth Mechanical has been doing business for almost 30 years. We offer our industrial clients efficient and cost-effective fabrication, modification, and repair of industrial equipment. From preventive plant maintenance, designing, installing and aligning machines, our exceptional skill and craftsmanship set us apart from the competition. Our number one priority day to day is safety. To see our published weekly Toolbox Talks, follow us on LinkedIn, Twitter, or Facebook.